This is the v1.24.0 version of the MicroPython documentation. The latest development version of this page may be more current.

`uctypes` – access binary data in a structured way¶

This module implements “foreign data interface” for MicroPython. The idea behind it is similar to CPython’s ctypes modules, but the actual API is different, streamlined and optimized for small size. The basic idea of the module is to define data structure layout with about the same power as the C language allows, and then access it using familiar dot-syntax to reference sub-fields.

Warning

uctypes module allows access to arbitrary memory addresses of the machine (including I/O and control registers). Uncareful usage of it may lead to crashes, data loss, and even hardware malfunction.

Defining structure layout¶

Structure layout is defined by a “descriptor” - a Python dictionary which encodes field names as keys and other properties required to access them as associated values:

{
    "field1": <properties>,
    "field2": <properties>,
    ...
}

Currently, uctypes requires explicit specification of offsets for each field. Offset are given in bytes from the structure start.

Following are encoding examples for various field types:

Scalar types:
```
"field_name": offset | uctypes.UINT32
```
in other words, the value is a scalar type identifier ORed with a field offset (in bytes) from the start of the structure.
Recursive structures:
```
"sub": (offset, {
    "b0": 0 | uctypes.UINT8,
    "b1": 1 | uctypes.UINT8,
})
```
i.e. value is a 2-tuple, first element of which is an offset, and second is a structure descriptor dictionary (note: offsets in recursive descriptors are relative to the structure it defines). Of course, recursive structures can be specified not just by a literal dictionary, but by referring to a structure descriptor dictionary (defined earlier) by name.
Arrays of primitive types:
```
"arr": (offset | uctypes.ARRAY, size | uctypes.UINT8),
```
i.e. value is a 2-tuple, first element of which is ARRAY flag ORed with offset, and second is scalar element type ORed number of elements in the array.
Arrays of aggregate types:
```
"arr2": (offset | uctypes.ARRAY, size, {"b": 0 | uctypes.UINT8}),
```
i.e. value is a 3-tuple, first element of which is ARRAY flag ORed with offset, second is a number of elements in the array, and third is a descriptor of element type.
Pointer to a primitive type:
```
"ptr": (offset | uctypes.PTR, uctypes.UINT8),
```
i.e. value is a 2-tuple, first element of which is PTR flag ORed with offset, and second is a scalar element type.
Pointer to an aggregate type:
```
"ptr2": (offset | uctypes.PTR, {"b": 0 | uctypes.UINT8}),
```
i.e. value is a 2-tuple, first element of which is PTR flag ORed with offset, second is a descriptor of type pointed to.
Bitfields:
```
"bitf0": offset | uctypes.BFUINT16 | lsbit << uctypes.BF_POS | bitsize << uctypes.BF_LEN,
```
i.e. value is a type of scalar value containing given bitfield (typenames are similar to scalar types, but prefixes with BF), ORed with offset for scalar value containing the bitfield, and further ORed with values for bit position and bit length of the bitfield within the scalar value, shifted by BF_POS and BF_LEN bits, respectively. A bitfield position is counted from the least significant bit of the scalar (having position of 0), and is the number of right-most bit of a field (in other words, it’s a number of bits a scalar needs to be shifted right to extract the bitfield).

In the example above, first a UINT16 value will be extracted at offset 0 (this detail may be important when accessing hardware registers, where particular access size and alignment are required), and then bitfield whose rightmost bit is lsbit bit of this UINT16, and length is bitsize bits, will be extracted. For example, if lsbit is 0 and bitsize is 8, then effectively it will access least-significant byte of UINT16.

Note that bitfield operations are independent of target byte endianness, in particular, example above will access least-significant byte of UINT16 in both little- and big-endian structures. But it depends on the least significant bit being numbered 0. Some targets may use different numbering in their native ABI, but uctypes always uses the normalized numbering described above.

Module contents¶

class uctypes.struct(addr, descriptor, layout_type=NATIVE, /)¶: Instantiate a “foreign data structure” object based on structure address in memory, descriptor (encoded as a dictionary), and layout type (see below).

uctypes.LITTLE_ENDIAN¶: Layout type for a little-endian packed structure. (Packed means that every field occupies exactly as many bytes as defined in the descriptor, i.e. the alignment is 1).

uctypes.BIG_ENDIAN¶: Layout type for a big-endian packed structure.

uctypes.NATIVE¶: Layout type for a native structure - with data endianness and alignment conforming to the ABI of the system on which MicroPython runs.

uctypes.sizeof(struct, layout_type=NATIVE, /)¶: Return size of data structure in bytes. The struct argument can be either a structure class or a specific instantiated structure object (or its aggregate field).

uctypes.addressof(obj)¶: Return address of an object. Argument should be bytes, bytearray or other object supporting buffer protocol (and address of this buffer is what actually returned).

uctypes.bytes_at(addr, size)¶: Capture memory at the given address and size as bytes object. As bytes object is immutable, memory is actually duplicated and copied into bytes object, so if memory contents change later, created object retains original value.

uctypes.bytearray_at(addr, size)¶: Capture memory at the given address and size as bytearray object. Unlike bytes_at() function above, memory is captured by reference, so it can be both written too, and you will access current value at the given memory address.

uctypes.UINT8¶
uctypes.INT8¶
uctypes.UINT16¶
uctypes.INT16¶
uctypes.UINT32¶
uctypes.INT32¶
uctypes.UINT64¶
uctypes.INT64¶: Integer types for structure descriptors. Constants for 8, 16, 32, and 64 bit types are provided, both signed and unsigned.

uctypes.FLOAT32¶
uctypes.FLOAT64¶: Floating-point types for structure descriptors.

uctypes.VOID¶: VOID is an alias for UINT8, and is provided to conveniently define C’s void pointers: (uctypes.PTR, uctypes.VOID).

uctypes.PTR¶
uctypes.ARRAY¶: Type constants for pointers and arrays. Note that there is no explicit constant for structures, it’s implicit: an aggregate type without PTR or ARRAY flags is a structure.

Structure descriptors and instantiating structure objects¶

Given a structure descriptor dictionary and its layout type, you can instantiate a specific structure instance at a given memory address using uctypes.struct() constructor. Memory address usually comes from following sources:

Predefined address, when accessing hardware registers on a baremetal system. Lookup these addresses in datasheet for a particular MCU/SoC.
As a return value from a call to some FFI (Foreign Function Interface) function.
From uctypes.addressof(), when you want to pass arguments to an FFI function, or alternatively, to access some data for I/O (for example, data read from a file or network socket).

Structure objects¶

Structure objects allow accessing individual fields using standard dot notation: my_struct.substruct1.field1. If a field is of scalar type, getting it will produce a primitive value (Python integer or float) corresponding to the value contained in a field. A scalar field can also be assigned to.

If a field is an array, its individual elements can be accessed with the standard subscript operator [] - both read and assigned to.

If a field is a pointer, it can be dereferenced using [0] syntax (corresponding to C * operator, though [0] works in C too). Subscripting a pointer with other integer values but 0 are also supported, with the same semantics as in C.

Summing up, accessing structure fields generally follows the C syntax, except for pointer dereference, when you need to use [0] operator instead of *.

Limitations¶

1. Accessing non-scalar fields leads to allocation of intermediate objects to represent them. This means that special care should be taken to layout a structure which needs to be accessed when memory allocation is disabled (e.g. from an interrupt). The recommendations are:

Avoid accessing nested structures. For example, instead of mcu_registers.peripheral_a.register1, define separate layout descriptors for each peripheral, to be accessed as peripheral_a.register1. Or just cache a particular peripheral: peripheral_a = mcu_registers.peripheral_a. If a register consists of multiple bitfields, you would need to cache references to a particular register: reg_a = mcu_registers.peripheral_a.reg_a.
Avoid other non-scalar data, like arrays. For example, instead of peripheral_a.register[0] use peripheral_a.register0. Again, an alternative is to cache intermediate values, e.g. register0 = peripheral_a.register[0].

2. Range of offsets supported by the uctypes module is limited. The exact range supported is considered an implementation detail, and the general suggestion is to split structure definitions to cover from a few kilobytes to a few dozen of kilobytes maximum. In most cases, this is a natural situation anyway, e.g. it doesn’t make sense to define all registers of an MCU (spread over 32-bit address space) in one structure, but rather a peripheral block by peripheral block. In some extreme cases, you may need to split a structure in several parts artificially (e.g. if accessing native data structure with multi-megabyte array in the middle, though that would be a very synthetic case).

uctypes – access binary data in a structured way¶