machine — functions related to the board¶

Reset related functions¶

machine.reset()¶

Resets the device in a manner similar to pushing the external RESET button.

machine.reset_cause()¶

Get the reset cause. See constants for the possible return values.

Interrupt related functions¶

machine.disable_irq()¶

Disable interrupt requests. Returns the previous IRQ state which should be considered an opaque value. This return value should be passed to the enable_irq function to restore interrupts to their original state, before disable_irq was called.

machine.enable_irq(state)¶

Re-enable interrupt requests. The state parameter should be the value that was returned from the most recent call to the disable_irq function.

Power related functions¶

machine.freq()¶

Returns a tuple of clock frequencies: (sysclk,) These correspond to:

• sysclk: frequency of the CPU

machine.idle()¶

Gates the clock to the CPU, useful to reduce power consumption at any time during short or long periods. Peripherals continue working and execution resumes as soon as any interrupt is triggered (on many ports this includes system timer interrupt occurring at regular intervals on the order of millisecond).

machine.sleep()¶

Stops the CPU and disables all peripherals except for WLAN. Execution is resumed from the point where the sleep was requested. For wake up to actually happen, wake sources should be configured first.

machine.deepsleep()¶

Stops the CPU and all peripherals (including networking interfaces, if any). Execution is resumed from the main script, just as with a reset. The reset cause can be checked to know that we are coming from machine.DEEPSLEEP. For wake up to actually happen, wake sources should be configured first, like Pin change or RTC timeout.

machine.wake_reason()¶

Get the wake reason. See constants for the possible return values.

Miscellaneous functions¶

machine.main(filename)¶

Set the filename of the main script to run after boot.py is finished. If this function is not called then the default file main.py will be executed.

It only makes sense to call this function from within boot.py.

machine.rng()¶

Return a 24-bit software generated random number.

machine.unique_id()¶

Returns a byte string with a unique identifier of a board/SoC. It will vary from a board/SoC instance to another, if underlying hardware allows. Length varies by hardware (so use substring of a full value if you expect a short ID). In some MicroPython ports, ID corresponds to the network MAC address.

machine.time_pulse_us(pin, pulse_level, timeout_us=1000000)¶

Time a pulse on the given pin, and return the duration of the pulse in microseconds. The pulse_level argument should be 0 to time a low pulse or 1 to time a high pulse.

The function first waits while the pin input is different to the pulse_level parameter, then times the duration that the pin is equal to pulse_level. If the pin is already equal to pulse_level then timing starts straight away.

The function will raise an OSError with ETIMEDOUT if either of the waits is longer than the given timeout value (which is in microseconds).

Constants¶

machine.IDLE¶

machine.SLEEP¶

machine.DEEPSLEEP¶

irq wake values

machine.PWRON_RESET¶

machine.HARD_RESET¶

machine.WDT_RESET¶

machine.DEEPSLEEP_RESET¶

machine.SOFT_RESET¶

reset causes

machine.WLAN_WAKE¶

machine.PIN_WAKE¶

machine.RTC_WAKE¶

wake reasons

Classes¶