:mod:`machine` --- functions related to the hardware ==================================================== .. module:: machine :synopsis: functions related to the hardware The ``machine`` module contains specific functions related to the hardware on a particular board. Most functions in this module allow to achieve direct and unrestricted access to and control of hardware blocks on a system (like CPU, timers, buses, etc.). Used incorrectly, this can lead to malfunction, lockups, crashes of your board, and in extreme cases, hardware damage. .. _machine_callbacks: A note of callbacks used by functions and class methods of :mod:`machine` module: all these callbacks should be considered as executing in an interrupt context. This is true for both physical devices with IDs >= 0 and "virtual" devices with negative IDs like -1 (these "virtual" devices are still thin shims on top of real hardware and real hardware interrupts). See :ref:`isr_rules`. Reset related functions ----------------------- .. function:: reset() Resets the device in a manner similar to pushing the external RESET button. .. function:: reset_cause() Get the reset cause. See :ref:`constants ` for the possible return values. Interrupt related functions --------------------------- .. function:: disable_irq() Disable interrupt requests. Returns the previous IRQ state which should be considered an opaque value. This return value should be passed to the `enable_irq()` function to restore interrupts to their original state, before `disable_irq()` was called. .. function:: enable_irq(state) Re-enable interrupt requests. The *state* parameter should be the value that was returned from the most recent call to the `disable_irq()` function. Power related functions ----------------------- .. function:: freq() Returns CPU frequency in hertz. .. function:: idle() Gates the clock to the CPU, useful to reduce power consumption at any time during short or long periods. Peripherals continue working and execution resumes as soon as any interrupt is triggered (on many ports this includes system timer interrupt occurring at regular intervals on the order of millisecond). .. function:: sleep() Stops the CPU and disables all peripherals except for WLAN. Execution is resumed from the point where the sleep was requested. For wake up to actually happen, wake sources should be configured first. .. function:: deepsleep() Stops the CPU and all peripherals (including networking interfaces, if any). Execution is resumed from the main script, just as with a reset. The reset cause can be checked to know that we are coming from `machine.DEEPSLEEP`. For wake up to actually happen, wake sources should be configured first, like `Pin` change or `RTC` timeout. .. only:: port_wipy .. function:: wake_reason() Get the wake reason. See :ref:`constants ` for the possible return values. Miscellaneous functions ----------------------- .. only:: port_wipy .. function:: rng() Return a 24-bit software generated random number. .. function:: unique_id() Returns a byte string with a unique identifier of a board/SoC. It will vary from a board/SoC instance to another, if underlying hardware allows. Length varies by hardware (so use substring of a full value if you expect a short ID). In some MicroPython ports, ID corresponds to the network MAC address. .. function:: time_pulse_us(pin, pulse_level, timeout_us=1000000) Time a pulse on the given *pin*, and return the duration of the pulse in microseconds. The *pulse_level* argument should be 0 to time a low pulse or 1 to time a high pulse. If the current input value of the pin is different to *pulse_level*, the function first (*) waits until the pin input becomes equal to *pulse_level*, then (**) times the duration that the pin is equal to *pulse_level*. If the pin is already equal to *pulse_level* then timing starts straight away. The function will return -2 if there was timeout waiting for condition marked (*) above, and -1 if there was timeout during the main measurement, marked (**) above. The timeout is the same for both cases and given by *timeout_us* (which is in microseconds). .. _machine_constants: Constants --------- .. data:: machine.IDLE machine.SLEEP machine.DEEPSLEEP IRQ wake values. .. data:: machine.PWRON_RESET machine.HARD_RESET machine.WDT_RESET machine.DEEPSLEEP_RESET machine.SOFT_RESET Reset causes. .. data:: machine.WLAN_WAKE machine.PIN_WAKE machine.RTC_WAKE Wake-up reasons. Classes ------- .. only:: not port_wipy .. toctree:: :maxdepth: 1 machine.Pin.rst machine.Signal.rst machine.UART.rst machine.SPI.rst machine.I2C.rst machine.RTC.rst machine.Timer.rst machine.WDT.rst .. only:: port_wipy .. toctree:: :maxdepth: 1 machine.Pin.rst machine.UART.rst machine.SPI.rst machine.I2C.rst machine.RTC.rst machine.Timer.rst machine.WDT.rst machine.ADC.rst machine.SD.rst