class UART – duplex serial communication bus¶
UART implements the standard UART/USART duplex serial communications protocol. At the physical level it consists of 2 lines: RX and TX. The unit of communication is a character (not to be confused with a string character) which can be 8 or 9 bits wide.
UART objects can be created and initialised using:
from machine import UART uart = UART(1, 9600) # init with given baudrate uart.init(9600, bits=8, parity=None, stop=1) # init with given parameters
A UART object acts like a stream object and reading and writing is done using the standard stream methods:
uart.read(10) # read 10 characters, returns a bytes object uart.readall() # read all available characters uart.readline() # read a line uart.readinto(buf) # read and store into the given buffer uart.write('abc') # write the 3 characters
Read characters. If
nbytesis specified then read at most that many bytes.
Return value: a bytes object containing the bytes read in. Returns
Read as much data as possible.
Return value: a bytes object or
Read bytes into the
nbytesis specified then read at most that many bytes. Otherwise, read at most
Return value: number of bytes read and stored into
Read a line, ending in a newline character.
Return value: the line read or
Write the buffer of bytes to the bus.
Return value: number of bytes written or