class Pin – control I/O pins¶
A pin is the basic object to control I/O pins. It has methods to set the mode of the pin (input, output, etc) and methods to get and set the digital logic level. For analog control of a pin, see the ADC class.
Board pins are identified by their string id:
from machine import Pin g = machine.Pin('GP9', mode=Pin.OUT, pull=None, drive=Pin.MED_POWER, alt=-1)
You can also configure the Pin to generate interrupts. For instance:
from machine import Pin def pincb(pin): print(pin.id()) pin_int = Pin('GP10', mode=Pin.IN, pull=Pin.PULL_DOWN) pin_int.irq(trigger=Pin.IRQ_RISING, handler=pincb) # the callback can be triggered manually pin_int.irq()() # to disable the callback pin_int.irq().disable()
Now every time a falling edge is seen on the gpio pin, the callback will be executed. Caution: mechanical push buttons have “bounce” and pushing or releasing a switch will often generate multiple edges. See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed explanation, along with various techniques for debouncing.
All pin objects go through the pin mapper to come up with one of the gpio pins.
init(mode, pull, *, drive, alt)¶
Initialise the pin:
modecan be one of:
Pin.IN- input pin.
Pin.OUT- output pin in push-pull mode.
Pin.OPEN_DRAIN- output pin in open-drain mode.
Pin.ALT- pin mapped to an alternate function.
Pin.ALT_OPEN_DRAIN- pin mapped to an alternate function in open-drain mode.
pullcan be one of:
None- no pull up or down resistor.
Pin.PULL_UP- pull up resistor enabled.
Pin.PULL_DOWN- pull down resitor enabled.
drivecan be one of:
Pin.LOW_POWER- 2mA drive capability.
Pin.MED_POWER- 4mA drive capability.
Pin.HIGH_POWER- 6mA drive capability.
altis the number of the alternate function. Please refer to the pinout and alternate functions table. for the specific alternate functions that each pin supports.
Get the pin id.
Get or set the digital logic level of the pin:
- With no argument, return 0 or 1 depending on the logic level of the pin.
valuegiven, set the logic level of the pin.
valuecan be anything that converts to a boolean. If it converts to
True, the pin is set high, otherwise it is set low.
Pin objects are callable. The call method provides a (fast) shortcut to set and get the value of the pin. See pin.value for more details.
Returns a list of the alternate functions supported by the pin. List items are a tuple of the form:
Toggle the value of the pin.
Get or set the pin mode.
Get or set the pin pull.
Get or set the pin drive strength.
irq(*, trigger, priority=1, handler=None, wake=None)¶
Create a callback to be triggered when the input level at the pin changes.
triggerconfigures the pin level which can generate an interrupt. Possible values are:
Pin.IRQ_FALLINGinterrupt on falling edge.
Pin.IRQ_RISINGinterrupt on rising edge.
Pin.IRQ_LOW_LEVELinterrupt on low level.
Pin.IRQ_HIGH_LEVELinterrupt on high level.
The values can be ORed together, for instance mode=Pin.IRQ_FALLING | Pin.IRQ_RISING
prioritylevel of the interrupt. Can take values in the range 1-7. Higher values represent higher priorities.
handleris an optional function to be called when new characters arrive.
wakesselects the power mode in which this interrupt can wake up the board. Please note:
wake_from=machine.Sleep.ACTIVEany pin can wake the board.
GP11, GP17`` or
GP24can wake the board. Note that only 1 of this pins can be enabled as a wake source at the same time, so, only the last enabled pin as a
machine.Sleep.SUSPENDEDwake source will have effect.
GP24can wake the board. In this case all of the 6 pins can be enabled as a
machine.Sleep.HIBERNATEwake source at the same time.
- Values can be ORed to make a pin generate interrupts in more than one power mode.
Returns a callback object.
Pinobjects supported by the board. Examples:
Pin.board.GP25 led = Pin(Pin.board.GP25, mode=Pin.OUT) Pin.board.GP2.alt_list()
The following constants are used to configure the pin objects. Note that not all constants are available on all ports.