class WIZNET5K – control WIZnet5x00 Ethernet modules¶
This class allows you to control WIZnet5x00 Ethernet adaptors based on the W5200 and W5500 chipsets. The particular chipset that is supported by the firmware is selected at compile-time via the MICROPY_PY_WIZNET5K option.
import network nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4) print(nic.ifconfig()) # now use socket as usual ...
For this example to work the WIZnet5x00 module must have the following connections:
MOSI connected to X8
MISO connected to X7
SCLK connected to X6
nSS connected to X5
nRESET connected to X4
It is possible to use other SPI buses and other pins for nSS and nRESET.
WIZNET5K(spi, pin_cs, pin_rst)¶
Create a WIZNET5K driver object, initialise the WIZnet5x00 module using the given SPI bus and pins, and return the WIZNET5K object.
All of these objects will be initialised by the driver, so there is no need to initialise them yourself. For example, you can use:
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
Trueif the physical Ethernet link is connected and up. Returns
ifconfig([(ip, subnet, gateway, dns)])¶
Get/set IP address, subnet mask, gateway and DNS.
When called with no arguments, this method returns a 4-tuple with the above information.
To set the above values, pass a 4-tuple with the required information. For example:
nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '220.127.116.11'))
Dump the WIZnet5x00 registers. Useful for debugging.